BAUMA CHINA 2026 Exhibit Reveal 5 —Hi6T

HYNEE will showcase the Hi6T at BAUMA CHINA 2026. Its central promise — steady, controlled work at height — is built into a single telescopic mast. The machine offers a maximum working height of 7.92 m, a body width of 0.81 m and a rated load of 200 kg. Our team refers to it as the light cavalry, a name that captures its character well: light in weight and agile in movement, yet engineered for precision tasks that demand dependable support.

Twin Cylinders: More Stable, Easier to Maintain

Chain-driven mast lifts rely on chains to raise the platform. Chains stretch over time, wear under load and require regular tensioning to remain within specification. The Hi6T removes this wear-prone link altogether. Twin hydraulic cylinders drive the telescopic mast in synchronisation, distributing the load evenly across both sides so the structure stays balanced through every stage of the ascent.

The arrangement also provides a useful safety margin. If hydraulic pressure is interrupted, the cylinders continue to carry the load and cushion the movement, preventing hard mechanical shocks. Lateral sway therefore remains well controlled even at the maximum platform height of 5.92 m. Operators feel no jolting or vibration, and that stability is precisely what allows precision work to stay precise. With fewer moving parts and no chain tension to adjust, routine maintenance is also simpler and faster.

Compact by Design

Stowed, the Hi6T measures 1.45 × 0.81 × 1.98 m and weighs 1,260 kg. Its 0.81 m width allows it to pass through standard doorways, passenger elevators and racking aisles without difficulty. The 1.98 m stowed height means the machine can travel between floors in a passenger elevator, with no disassembly and no crane required. For transfer across the plant, the entire unit can be handled by forklift. Cross-floor and cross-site deployment therefore takes very little planning.

Extension Platform: 0.437 m More Forward Reach

The standard platform measures 1.35 × 0.75 m. This version adds an extending section that slides 0.437 m forward, bringing the total platform depth to approximately 1.79 m. Working beneath outdoor air-conditioning units or ventilation ducting often leaves a gap of no more than half a meter, which places the target just beyond the reach of an operator standing at the platform edge. Once the extension is deployed, that area becomes accessible without repositioning the chassis.

The extension travels with the main platform and remains rigid underfoot when extended, so stepping on and off or handling materials feels natural. In daily site work, avoiding a single repositioning commonly saves around half an hour of labour time.

Safety: From Active Detection to Power-Failure Backup

The electronic and mechanical systems are designed to complement each other, covering the most common risks in the specific scenario where each one arises:

• Automatic pothole protection: Once the platform is raised, the protection guards deploy automatically and sit close to the ground. When the machine crosses a pothole, a manhole cover or a floor-level change, the guards take the load immediately, so even a temporarily suspended wheel will not affect stability.
• Automatic braking: Releasing the joystick locks the drive instantly. The machine holds its position without slipping on level ground and on ramps alike, eliminating any risk of rolling.
• Emergency lowering: In the event of a power failure or system fault, a manual auxiliary lowering valve returns the platform smoothly to the ground. Independent emergency-stop buttons are provided on the platform and at ground level.
• Intelligent fault diagnosis: The controller monitors the electrical, hydraulic and sensor systems continuously. When an abnormality is detected, a fault code is output directly, which removes guesswork from troubleshooting and shortens downtime.
• Overload and tilt protection: The weighing system enforces the 200 kg rated load strictly. In an overload condition, lifting and driving are disabled simultaneously. If the tilt angle exceeds the permitted limit, hazardous movements are locked out at once, accompanied by an audible and visual alarm.

Application Scenarios

• Commercial complexes and venues: Standard doorways and passenger elevators present no obstacle. The Hi6T moves freely into shopping mall atriums, hotel lobbies and theatres, without damaging floor finishes or disrupting everyday circulation.
• Warehousing, logistics and racking aisles: The machine operates comfortably in the narrow aisles of modern high-bay racking, where it improves the efficiency of stocktaking, equipment inspection and local goods adjustment.
• Precision manufacturing and clean workshops: The Hi6T suits electronics plants, precision instrument workshops and comparable environments. Its pure electric drive is quiet and emission-free, and lifting is smooth and free of jerk, protecting both sensitive equipment and personnel.

Detailed Specifications

Main parameters of the other two models in the series: